| Author |
Message |
pupiddo
|
|
|
Post subject: Too lag from last 2 nouveau upgrade
 Posted: 17.11.2013, 09:59
|
|
Joined: 2012-03-21
Posts: 10
Status: Offline
|
|
Hi,
from 2 last upgrade on my acer Aspire SA80 there are many lags and Xserver suddendly reboot.
I know the cpu temperature problem and I' just reapplied the thermal paste.
For the mouse there is only message in dmesg but mouse work properly.
Here my dmesg:
[code:1:001724a010]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12-0.slh.2-aptosid-686 (Debian 3.12-2) (s.l-h@gmx.de) (gcc version 4.8.2 (Debian 4.8.2-4) ) #1 SMP PREEMPT Thu Nov 14 22:23:11 UTC 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007bfeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bff0000-0x000000007bff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007bff3000-0x000000007bffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer Aspire SA80/E661GXM , BIOS R01-C3 03/28/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7bff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 2 base 0D8000000 mask FF8000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5a70-0x000f5a7f] mapped at [c00f5a70]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[ 0.000000] [mem 0x36400000-0x367fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[ 0.000000] [mem 0x30000000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[ 0.000000] [mem 0x36800000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01549000, 0x01549fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x368c0000-0x37457fff]
[ 0.000000] ACPI: RSDP 000f7500 00014 (v00 AWARD )
[ 0.000000] ACPI: RSDT 7bff3040 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7bff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7bff3180 03AC7 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7bff0000 00040
[ 0.000000] ACPI: APIC 7bff6cc0 00068 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1095MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0154a000, 0x0154afff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7bfeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7bfeffff]
[ 0.000000] On node 0 totalpages: 507790
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2192 pages used for memmap
[ 0.000000] HighMem zone: 280562 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x7c000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5ca7000 s27328 r0 d21824 u49152
[ 0.000000] pcpu-alloc: s27328 r0 d21824 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506014
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-0.slh.2-aptosid-686 root=UUID=441d3a40-59d6-43b8-b5c2-e59bf9a3cc73 ro single
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bff0)
[ 0.000000] Memory: 1996872K/2031160K available (3093K kernel code, 307K rwdata, 1208K rodata, 412K init, 348K bss, 34288K reserved, 1122248K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1482000 - 0xc14e9000 ( 412 kB)
[ 0.000000] .data : 0xc1305872 - 0xc1481fc0 (1521 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1305872 (3094 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 4063232 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3066.755 MHz processor
[ 0.003003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.51 BogoMIPS (lpj=3066755)
[ 0.003423] pid_max: default: 32768 minimum: 301
[ 0.003706] Security Framework initialized
[ 0.004015] SELinux: Disabled at boot.
[ 0.004238] Mount-cache hash table entries: 512
[ 0.004820] Initializing cgroup subsys memory
[ 0.005039] Initializing cgroup subsys devices
[ 0.005250] Initializing cgroup subsys freezer
[ 0.005459] Initializing cgroup subsys net_cls
[ 0.005668] Initializing cgroup subsys blkio
[ 0.005875] Initializing cgroup subsys perf_event
[ 0.006075] CPU0: Hyper-Threading is disabled
[ 0.006289] mce: CPU supports 4 MCE banks
[ 0.006514] CPU0: Thermal monitoring enabled (TM1)
[ 0.006750] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.006750] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[ 0.006750] tlb_flushall_shift: 6
[ 0.011301] ACPI: Core revision 20130725
[ 0.013620] ACPI: All ACPI Tables successfully acquired
[ 0.014196] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.014731] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.025348] smpboot: CPU0: Intel(R) Celeron(R) CPU 3.06GHz (fam: 0f, model: 04, stepping: 09)
[ 0.026000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.026000] ... version: 0
[ 0.026000] ... bit width: 40
[ 0.026000] ... generic registers: 18
[ 0.026000] ... value mask: 000000ffffffffff
[ 0.026004] ... max period: 0000007fffffffff
[ 0.026217] ... fixed-purpose events: 0
[ 0.026426] ... event mask: 000000000003ffff
[ 0.032107] Brought up 1 CPUs
[ 0.032335] smpboot: Total of 1 processors activated (6133.51 BogoMIPS)
[ 0.033288] devtmpfs: initialized
[ 0.034468] PM: Registering ACPI NVS region [mem 0x7bff0000-0x7bff2fff] (12288 bytes)
[ 0.034984] pinctrl core: initialized pinctrl subsystem
[ 0.035164] NET: Registered protocol family 16
[ 0.035555] cpuidle: using governor ladder
[ 0.036027] cpuidle: using governor menu
[ 0.036292] ACPI: bus type PCI registered
[ 0.036513] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.061358] PCI: PCI BIOS revision 2.10 entry at 0xfbda0, last bus=1
[ 0.061576] PCI: Using configuration type 1 for base access
[ 0.062791] bio: create slab <bio> at 0
[ 0.063222] ACPI: Added _OSI(Module Device)
[ 0.063436] ACPI: Added _OSI(Processor Device)
[ 0.063642] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.063852] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.064778] ACPI: EC: Look up EC in DSDT
[ 0.068763] ACPI: Interpreter enabled
[ 0.068990] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.069417] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.069890] ACPI: (supports S0 S3 S4 S5)
[ 0.070021] ACPI: Using IOAPIC for interrupt routing
[ 0.070293] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.070792] ACPI: No dock devices found.
[ 0.078149] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.078379] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.078752] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.079130] acpi PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
[ 0.079136] acpi PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
[ 0.079140] acpi PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
[ 0.079145] acpi PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
[ 0.079149] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.079153] acpi PNP0A03:00: host bridge window [mem 0x7c000000-0xfebfffff] (ignored)
[ 0.079157] PCI: root bus 00: using default resources
[ 0.079163] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.079838] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5)
[ 0.080012] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5)
[ 0.080224] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5)
[ 0.080440] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5)
[ 0.080652] ACPI: \_SB_.PCI0.LNKE: can't evaluate _ADR (0x5)
[ 0.081006] ACPI: \_SB_.PCI0.LNKF: can't evaluate _ADR (0x5)
[ 0.081227] ACPI: \_SB_.PCI0.LNKG: can't evaluate _ADR (0x5)
[ 0.081445] ACPI: \_SB_.PCI0.LNKH: can't evaluate _ADR (0x5)
[ 0.081663] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
[ 0.081884] ACPI: \_SB_.PCI0.PIC_: can't evaluate _ADR (0x5)
[ 0.082006] ACPI: \_SB_.PCI0.DMA1: can't evaluate _ADR (0x5)
[ 0.082232] ACPI: \_SB_.PCI0.TMR_: can't evaluate _ADR (0x5)
[ 0.082466] ACPI: \_SB_.PCI0.RTC_: can't evaluate _ADR (0x5)
[ 0.082686] ACPI: \_SB_.PCI0.SPKR: can't evaluate _ADR (0x5)
[ 0.083006] ACPI: \_SB_.PCI0.COPR: can't evaluate _ADR (0x5)
[ 0.083233] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
[ 0.083450] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
[ 0.083678] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
[ 0.083900] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
[ 0.084006] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
[ 0.084221] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
[ 0.084435] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
[ 0.084650] ACPI: \_SB_.PCI0.PSMR: can't evaluate _ADR (0x5)
[ 0.085005] PCI host bridge to bus 0000:00
[ 0.085221] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.085435] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.085650] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.085922] pci 0000:00:00.0: [1039:0661] type 00 class 0x060000
[ 0.086012] pci 0000:00:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff]
[ 0.086227] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
[ 0.086376] pci 0000:00:02.0: [1039:0964] type 00 class 0x060100
[ 0.086586] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[ 0.086625] pci 0000:00:02.5: reg 0x10: [io 0x01f0-0x01f7]
[ 0.086639] pci 0000:00:02.5: reg 0x14: [io 0x03f4-0x03f7]
[ 0.086652] pci 0000:00:02.5: reg 0x18: [io 0x0170-0x0177]
[ 0.086665] pci 0000:00:02.5: reg 0x1c: [io 0x0374-0x0377]
[ 0.086678] pci 0000:00:02.5: reg 0x20: [io 0x4000-0x400f]
[ 0.086735] pci 0000:00:02.5: PME# supported from D3cold
[ 0.086864] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[ 0.086888] pci 0000:00:02.7: reg 0x10: [io 0xd000-0xd0ff]
[ 0.086902] pci 0000:00:02.7: reg 0x14: [io 0xd400-0xd47f]
[ 0.086986] pci 0000:00:02.7: supports D1 D2
[ 0.086990] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.087133] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[ 0.087154] pci 0000:00:03.0: reg 0x10: [mem 0xe2102000-0xe2102fff]
[ 0.087300] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.087570] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[ 0.087589] pci 0000:00:03.1: reg 0x10: [mem 0xe2103000-0xe2103fff]
[ 0.087728] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 0.088018] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[ 0.088039] pci 0000:00:03.2: reg 0x10: [mem 0xe2104000-0xe2104fff]
[ 0.088184] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 0.088477] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[ 0.088501] pci 0000:00:03.3: reg 0x10: [mem 0xe2100000-0xe2100fff]
[ 0.088593] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.088675] pci 0000:00:03.3: System wakeup disabled by ACPI
[ 0.089072] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
[ 0.089098] pci 0000:00:04.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.089112] pci 0000:00:04.0: reg 0x14: [mem 0xe2101000-0xe2101fff]
[ 0.089164] pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.089201] pci 0000:00:04.0: supports D1 D2
[ 0.089204] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089286] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.089563] pci 0000:00:05.0: [1039:0180] type 00 class 0x010185
[ 0.089587] pci 0000:00:05.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.089600] pci 0000:00:05.0: reg 0x14: [io 0xe000-0xe003]
[ 0.089613] pci 0000:00:05.0: reg 0x18: [io 0xe400-0xe407]
[ 0.089626] pci 0000:00:05.0: reg 0x1c: [io 0xe800-0xe803]
[ 0.089639] pci 0000:00:05.0: reg 0x20: [io 0xec00-0xec0f]
[ 0.089695] pci 0000:00:05.0: PME# supported from D3cold
[ 0.090059] pci 0000:00:09.0: [10de:0322] type 00 class 0x030000
[ 0.090085] pci 0000:00:09.0: reg 0x10: [mem 0xe0000000-0xe0ffffff]
[ 0.090098] pci 0000:00:09.0: reg 0x14: [mem 0xc0000000-0xcfffffff pref]
[ 0.090148] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.090313] pci 0000:00:0b.0: [1131:7133] type 00 class 0x048000
[ 0.090339] pci 0000:00:0b.0: reg 0x10: [mem 0xe2105000-0xe21057ff]
[ 0.090431] pci 0000:00:0b.0: supports D1 D2
[ 0.090622] pci 0000:01:00.0: [1039:6330] type 00 class 0x030000
[ 0.090642] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.090651] pci 0000:01:00.0: reg 0x14: [mem 0xe2000000-0xe201ffff]
[ 0.090660] pci 0000:01:00.0: reg 0x18: [io 0xc000-0xc07f]
[ 0.090718] pci 0000:01:00.0: supports D1 D2
[ 0.090794] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.091012] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.091020] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe20fffff]
[ 0.091026] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.091039] pci_bus 0000:00: on NUMA node 0
[ 0.091282] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[ 0.092314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.093106] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.094010] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.094811] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.095599] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.096433] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 14 15)
[ 0.097112] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.098738] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.099023] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.099071] Found 1 acpi root devices
[ 0.099268] vgaarb: device added: PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.099654] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.100009] vgaarb: loaded
[ 0.100214] vgaarb: bridge control possible 0000:01:00.0
[ 0.100423] vgaarb: no bridge control possible 0000:00:09.0
[ 0.100757] PCI: Using ACPI for IRQ routing
[ 0.101013] PCI: pci_cache_line_size set to 64 bytes
[ 0.101077] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.101082] e820: reserve RAM buffer [mem 0x7bff0000-0x7bffffff]
[ 0.101285] NetLabel: Initializing
[ 0.101498] NetLabel: domain hash size = 128
[ 0.101706] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.101933] NetLabel: unlabeled traffic allowed by default
[ 0.102098] Switched to clocksource refined-jiffies
[ 0.102404] pnp: PnP ACPI init
[ 0.102639] ACPI: bus type PNP registered
[ 0.103359] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.103582] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.103795] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.104015] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.104230] system 00:00: [mem 0x7bff0000-0x7bffffff] could not be reserved
[ 0.104443] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.104657] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.104870] system 00:00: [mem 0x00100000-0x7bfeffff] could not be reserved
[ 0.105007] system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
[ 0.105222] system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved
[ 0.105435] system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.105648] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.106010] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.106436] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.106655] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.106866] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.107014] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.107230] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107261] pnp 00:02: [dma 4]
[ 0.107310] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.107385] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.107447] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.107510] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.108135] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.108534] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.109022] pnp 00:08: [dma 3]
[ 0.109131] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.109288] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.109338] pnp: PnP ACPI: found 10 devices
[ 0.109550] ACPI: bus type PNP unregistered
[ 0.147426] Switched to clocksource acpi_pm
[ 0.147695] pci 0000:00:04.0: BAR 6: assigned [mem 0x7c000000-0x7c01ffff pref]
[ 0.147993] pci 0000:00:09.0: BAR 6: assigned [mem 0x7c020000-0x7c03ffff pref]
[ 0.148093] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.148311] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.148554] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe20fffff]
[ 0.148781] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.149197] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.149202] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.149206] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.149210] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe20fffff]
[ 0.149213] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
[ 0.149289] NET: Registered protocol family 2
[ 0.149866] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.150184] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.150461] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.150791] TCP: reno registered
[ 0.151056] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.151308] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.151692] NET: Registered protocol family 1
[ 0.374467] pci 0000:00:09.0: Boot video device
[ 0.374483] PCI: CLS 32 bytes, default 64
[ 0.374598] Unpacking initramfs...
[ 0.907558] Freeing initrd memory: 11872K (f68c0000 - f7458000)
[ 0.908073] microcode: CPU0 sig=0xf49, pf=0x10, revision=0x0
[ 0.908389] microcode: Microcode Update Driver: v2.00 <tigran>, Peter Oruba
[ 0.909257] audit: initializing netlink socket (disabled)
[ 0.909514] type=2000 audit(1384600901.908:1): initialized
[ 0.910261] bounce pool size: 64 pages
[ 0.910495] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.912964] zbud: loaded
[ 0.913447] VFS: Disk quotas dquot_6.5.2
[ 0.913745] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.914211] msgmni has been set to 1731
[ 0.915157] alg: No test for stdrng (krng)
[ 0.915384] Key type asymmetric registered
[ 0.915592] Asymmetric key parser 'x509' registered
[ 0.915899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.916400] io scheduler noop registered
[ 0.916610] io scheduler deadline registered
[ 0.916890] io scheduler cfq registered (default)
[ 0.917328] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.917576] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.917881] GHES: HEST is not enabled!
[ 0.918286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.939184] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.960225] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.961194] Linux agpgart interface v0.103
[ 0.961521] libphy: Fixed MDIO Bus: probed
[ 0.961805] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.962051] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.962614] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.962993] mousedev: PS/2 mouse device common for all mice
[ 0.963344] rtc_cmos 00:03: RTC can wake from S4
[ 0.963745] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.963996] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
[ 0.964646] TCP: cubic registered
[ 0.965090] NET: Registered protocol family 10
[ 0.965717] Key type dns_resolver registered
[ 0.966216] Using IPI No-Shortcut mode
[ 0.966607] registered taskstats version 1
[ 0.967094] IMA: No TPM chip found, activating TPM-bypass!
[ 0.967786] rtc_cmos 00:03: setting system clock to 2013-11-16 11:21:42 UTC (1384600902)
[ 0.968964] Freeing unused kernel memory: 412K (c1482000 - c14e9000)
[ 0.994649] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.056456] systemd-udevd[56]: starting version 204
[ 1.210422] SCSI subsystem initialized
[ 1.234593] ACPI: bus type USB registered
[ 1.234870] usbcore: registered new interface driver usbfs
[ 1.243155] usbcore: registered new interface driver hub
[ 1.246737] usbcore: registered new device driver usb
[ 1.249180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.249986] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.258159] libata version 3.00 loaded.
[ 1.258716] pata_sis 0000:00:02.5: version 0.5.2
[ 1.258972] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 1.267501] ohci-pci: OHCI PCI platform driver
[ 1.277240] scsi0 : pata_sis
[ 1.281105] scsi1 : pata_sis
[ 1.281453] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 1.281684] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 1.288567] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 1.288801] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 1.289308] ohci-pci 0000:00:03.0: irq 20, io mem 0xe2102000
[ 1.336670] ehci-pci: EHCI PCI platform driver
[ 1.337740] sis900.c: v1.08.10 Apr. 2 2006
[ 1.342172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.342395] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.342762] usb usb1: Product: OHCI PCI host controller
[ 1.342970] usb usb1: Manufacturer: Linux 3.12-0.slh.2-aptosid-686 ohci_hcd
[ 1.343197] usb usb1: SerialNumber: 0000:00:03.0
[ 1.344256] hub 1-0:1.0: USB hub found
[ 1.345064] hub 1-0:1.0: 3 ports detected
[ 1.345933] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 1.346214] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 2
[ 1.346672] ehci-pci 0000:00:03.3: irq 23, io mem 0xe2100000
[ 1.352087] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.352424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.352641] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.353058] usb usb2: Product: EHCI Host Controller
[ 1.353269] usb usb2: Manufacturer: Linux 3.12-0.slh.2-aptosid-686 ehci_hcd
[ 1.353482] usb usb2: SerialNumber: 0000:00:03.3
[ 1.353953] hub 2-0:1.0: USB hub found
[ 1.354239] hub 2-0:1.0: 8 ports detected
[ 1.403206] hub 1-0:1.0: USB hub found
[ 1.403447] hub 1-0:1.0: 3 ports detected
[ 1.413659] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 9.
[ 1.439639] 0000:00:04.0: Using transceiver found at address 9 as default
[ 1.442623] eth0: SiS 900 PCI Fast Ethernet at 0x0001d800, IRQ 19, 00:16:ec:60:b2:62
[ 1.446116] sata_sis 0000:00:05.0: version 1.0
[ 1.446340] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 1.450107] scsi2 : sata_sis
[ 1.452457] ata1.00: ATAPI: HL-DT-ST DVD-RW_GSA-H11N, JH02, max UDMA/66
[ 1.452852] scsi3 : sata_sis
[ 1.453215] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xec00 irq 17
[ 1.453443] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe800 bmdma 0xec08 irq 17
[ 1.454244] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 1.454496] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.454931] ohci-pci 0000:00:03.1: irq 21, io mem 0xe2103000
[ 1.474454] ata1.00: configured for UDMA/66
[ 1.481217] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW_GSA-H11N JH02 PQ: 0 ANSI: 5
[ 1.508420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.508646] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.509038] usb usb3: Product: OHCI PCI host controller
[ 1.509249] usb usb3: Manufacturer: Linux 3.12-0.slh.2-aptosid-686 ohci_hcd
[ 1.529688] usb usb3: SerialNumber: 0000:00:03.1
[ 1.531422] hub 3-0:1.0: USB hub found
[ 1.532494] hub 3-0:1.0: 3 ports detected
[ 1.534474] ohci-pci 0000:00:03.2: OHCI PCI host controller
[ 1.534707] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 1.538460] ohci-pci 0000:00:03.2: irq 22, io mem 0xe2104000
[ 1.591277] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.591504] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.591878] usb usb4: Product: OHCI PCI host controller
[ 1.592119] usb usb4: Manufacturer: Linux 3.12-0.slh.2-aptosid-686 ohci_hcd
[ 1.592336] usb usb4: SerialNumber: 0000:00:03.2
[ 1.593426] hub 4-0:1.0: USB hub found
[ 1.593779] hub 4-0:1.0: 2 ports detected
[ 1.758064] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.761627] ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.761841] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.768607] ata3.00: configured for UDMA/133
[ 1.779227] scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.908097] tsc: Refined TSC clocksource calibration: 3066.775 MHz
[ 2.084075] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.125087] ata4.00: ATA-7: ST3160812AS, 3.AAE, max UDMA/133
[ 2.125306] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.200054] ata4.00: configured for UDMA/133
[ 2.211208] scsi 3:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5
[ 2.251176] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.251400] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.252955] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.259163] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.259657] sd 2:0:0:0: [sda] Write Protect is off
[ 2.259868] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.259912] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.262369] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.262854] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.263098] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.263157] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.269226] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.269685] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.270513] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.281454] sdb: sdb1
[ 2.282342] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.282943] sda: sda1 sda2 sda3
[ 2.283934] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.682069] usb 1-2: new full-speed USB device number 2 using ohci-pci
[ 2.868832] usb 1-2: New USB device found, idVendor=06f8, idProduct=3004
[ 2.869068] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.869288] usb 1-2: Product: USB camera
[ 2.908100] Switched to clocksource tsc
[ 3.029039] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 3.218070] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[ 3.218295] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.218517] usb 3-1: Product: USB Optical Mouse
[ 3.218734] usb 3-1: Manufacturer: Logitech
[ 3.228570] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.237242] usbcore: registered new interface driver usbhid
[ 3.237472] usbhid: USB HID core driver
[ 3.244921] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input1
[ 3.245879] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-1/input0
[ 3.487036] usb 3-2: new full-speed USB device number 3 using ohci-pci
[ 3.679984] usb 3-2: New USB device found, idVendor=058f, idProduct=9360
[ 3.680215] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.680430] usb 3-2: Product: USB Reader
[ 3.680638] usb 3-2: Manufacturer:
[ 3.680842] usb 3-2: SerialNumber: 2004888
[ 3.689707] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 3.690099] scsi4 : usb-storage 3-2:1.0
[ 3.691236] usbcore: registered new interface driver usb-storage
[ 4.170131] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.170355] ACPI: Thermal Zone [THRM] (78 C)
[ 4.171224] ACPI: Fan [FAN] (on)
[ 4.217709] PM: Starting manual resume from disk
[ 4.274814] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.700858] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 4.707871] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 4.714851] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 4.721874] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 4.723350] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 4.723910] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 4.724491] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 4.725183] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 4.820832] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 4.831837] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 4.842830] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 4.853836] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 6.022473] systemd-udevd[332]: starting version 204
[ 6.710336] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.710756] ACPI: Power Button [PWRB]
[ 6.711183] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 6.711582] ACPI: Sleep Button [FUTS]
[ 6.711922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.712369] ACPI: Power Button [PWRF]
[ 6.730720] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[ 6.784236] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[ 6.797637] IT8705 SuperIO detected.
[ 6.798238] parport_pc 00:08: reported by Plug and Play ACPI
[ 6.798533] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 7.152802] [drm] Initialized drm 1.1.0 20060810
[ 7.204499] wmi: Mapper loaded
[ 7.235766] [drm] hdmi device not found 0 9 1
[ 7.238104] nouveau [ DEVICE][0000:00:09.0] BOOT0 : 0x034200b1
[ 7.238327] nouveau [ DEVICE][0000:00:09.0] Chipset: NV34 (NV34)
[ 7.238539] nouveau [ DEVICE][0000:00:09.0] Family : NV30
[ 7.240125] nouveau [ VBIOS][0000:00:09.0] checking PRAMIN for image...
[ 7.342270] media: Linux media interface: v0.10
[ 7.355711] Linux video capture interface: v2.00
[ 7.411790] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 7.432139] nouveau [ VBIOS][0000:00:09.0] ... appears to be valid
[ 7.432370] nouveau [ VBIOS][0000:00:09.0] using image from PRAMIN
[ 7.432590] nouveau [ VBIOS][0000:00:09.0] BMP version 5.28
[ 7.433019] nouveau [ VBIOS][0000:00:09.0] version 04.34.20.56.00
[ 7.437495] nouveau W[ PTIMER][0000:00:09.0] unknown input clock freq
[ 7.437727] nouveau [ PFB][0000:00:09.0] RAM type: DDR1
[ 7.437943] nouveau [ PFB][0000:00:09.0] RAM size: 256 MiB
[ 7.438188] nouveau [ PFB][0000:00:09.0] ZCOMP: 0 tags
[ 7.444654] [TTM] Zone kernel: Available graphics memory: 443454 kiB
[ 7.444880] [TTM] Zone highmem: Available graphics memory: 1004578 kiB
[ 7.445113] [TTM] Initializing pool allocator
[ 7.445355] nouveau [ DRM] VRAM: 255 MiB
[ 7.445575] nouveau [ DRM] GART: 128 MiB
[ 7.446167] nouveau [ DRM] BMP version 5.40
[ 7.446395] nouveau [ DRM] DCB version 2.2
[ 7.446614] nouveau [ DRM] DCB outp 00: 01000300 000088b8
[ 7.446834] nouveau [ DRM] DCB outp 01: 02010310 000088b8
[ 7.447069] nouveau [ DRM] DCB outp 02: 01010312 00000000
[ 7.447289] nouveau [ DRM] DCB outp 03: 02020321 00000333
[ 7.447670] nouveau [ DRM] Loading NV17 power sequencing microcode
[ 7.448627] nouveau [ DRM] Saving VGA fonts
[ 7.513680] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.513917] [drm] No driver support for vblank timestamp query.
[ 7.517747] nouveau [ DRM] 0xE085: Parsing digital output script table
[ 7.594898] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.609797] nouveau [ DRM] 0 available performance level(s)
[ 7.610035] nouveau [ DRM] c: core 249MHz memory 330MHz
[ 7.611398] nouveau [ DRM] MM: using M2MF for buffer copies
[ 7.611639] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 7.688999] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo f70de200
[ 7.691849] fbcon: nouveaufb (fb0) is primary device
[ 7.719503] nouveau [ DRM] 0xE085: Parsing digital output script table
[ 7.775589] Console: switching to colour frame buffer device 160x64
[ 7.778247] nouveau 0000:00:09.0: fb0: nouveaufb frame buffer device
[ 7.778268] nouveau 0000:00:09.0: registered panic notifier
[ 7.778294] [drm] Initialized nouveau 1.1.1 20120801 for 0000:00:09.0 on minor 0
[ 8.159099] intel8x0_measure_ac97_clock: measured 50304 usecs (2421 samples)
[ 8.159144] intel8x0: clocking to 48000
[ 8.160294] saa7133[0]: found at 0000:00:0b.0, rev: 209, irq: 19, latency: 32, mmio: 0xe2105000
[ 8.160351] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[ 8.160406] saa7133[0]: board init: gpio is 6400000
[ 8.492118] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 8.492203] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[ 8.492261] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[ 8.492319] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.492375] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[ 8.492432] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492489] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492547] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492604] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 f2 20 4c f0 73 05 29 00
[ 8.492660] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[ 8.492716] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[ 8.492776] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 e0 00 00 00 00 00 00 00 00 00
[ 8.492833] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492890] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492946] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.497094] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.498719] tveeprom 3-0050: Hauppauge model 67019, rev B4B4, serial# 4989170
[ 8.498764] tveeprom 3-0050: MAC address is 00:0d:fe:4c:20:f2
[ 8.498784] tveeprom 3-0050: tuner model is Philips 8275A (idx 114, type 4)
[ 8.498805] tveeprom 3-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 8.498833] tveeprom 3-0050: audio processor is SAA7131 (idx 41)
[ 8.498850] tveeprom 3-0050: decoder processor is SAA7131 (idx 35)
[ 8.498867] tveeprom 3-0050: has radio, has IR receiver, has IR transmitter
[ 8.498885] saa7133[0]: hauppauge eeprom: model=67019
[ 8.513907] gspca_main: v2.14.0 registered
[ 8.515878] gspca_main: sonixj-2.14.0 probing 06f8:3004
[ 8.533072] input: sonixj as /devices/pci0000:00/0000:00:03.0/usb1/1-2/input/input6
[ 8.533451] usbcore: registered new interface driver sonixj
[ 8.685122] tuner 3-004b: Tuner -1 found with type(s) Radio TV.
[ 8.753064] tda829x 3-004b: setting tuner address to 61
[ 8.801133] tda829x 3-004b: type set to tda8290+75a
[ 8.826302] usbcore: registered new interface driver snd-usb-audio
[ 11.823020] Registered IR keymap rc-hauppauge
[ 11.823849] input: i2c IR (HVR 1110) as /devices/virtual/rc/rc0/input7
[ 11.827155] rc0: i2c IR (HVR 1110) as /devices/virtual/rc/rc0
[ 11.827778] ir-kbd-i2c: i2c IR (HVR 1110) detected at i2c-3/3-0071/ir0 [saa7133[0]]
[ 11.864303] saa7133[0]: registered device video1 [v4l2]
[ 11.865239] saa7133[0]: registered device vbi0
[ 11.866222] saa7133[0]: registered device radio0
[ 11.906974] dvb_init() allocating 1 frontend
[ 11.926035] DVB: registering new adapter (saa7133[0])
[ 11.926695] saa7134 0000:00:0b.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 11.991016] tda1004x: setting up plls for 48MHz sampling clock
[ 12.184012] tda1004x: found firmware revision 29 -- ok
[ 12.359354] saa7134 ALSA driver for DMA sound loaded
[ 12.360167] saa7133[0]/alsa: saa7133[0] at 0xe2105000 irq 19 registered as card -1
[ 14.119206] Adding 1036188k swap on /dev/sda2. Priority:-1 extents:1 across:1036188k FS
[ 14.175289] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 14.446628] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.140226] device-mapper: uevent: version 1.0.3
[ 15.143342] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 16.708123] fuse init (API version 7.22)
[ 16.772403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,user_xattr
[ 16.790540] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 18.610531] NET: Registered protocol family 17
[ 19.536383] eth0: Media Link Off
[ 24.578624] eth0: Media Link On 100mbps full-duplex
[ 39.581595] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 39.582003] CPU0: Core temperature/speed normal
[ 63.225862] usb 3-1: USB disconnect, device number 2
[ 64.770090] usb 3-1: new low-speed USB device number 4 using ohci-pci
[ 64.959521] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[ 64.960278] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 64.960940] usb 3-1: Product: USB Optical Mouse
[ 64.961598] usb 3-1: Manufacturer: Logitech
[ 64.976999] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input8
[ 64.978090] hid-generic 0003:046D:C05A.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-1/input0
[ 124.965214] usb 3-1: USB disconnect, device number 4
[ 126.509031] usb 3-1: new low-speed USB device number 5 using ohci-pci
[ 126.698844] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[ 126.699598] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 126.700346] usb 3-1: Product: USB Optical Mouse
[ 126.701075] usb 3-1: Manufacturer: Logitech
[ 126.715798] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input9
[ 126.716950] hid-generic 0003:046D:C05A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-1/input0
[ 186.704601] usb 3-1: USB disconnect, device number 5
[ 188.249038] usb 3-1: new low-speed USB device number 6 using ohci-pci
[ 188.438230] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[ 188.439002] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 188.439793] usb 3-1: Product: USB Optical Mouse
[ 188.440571] usb 3-1: Manufacturer: Logitech
[ 188.455135] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input10
[ 188.456280] hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-1/input0
[ 198.100753] vgaarb: device changed decodes: PCI:0000:00:09.0,olddecodes=io+mem,decodes=none:owns=none
[ 204.171177] lp0: using parport0 (interrupt-driven).
[ 204.171188] lp0: console ready
[ 204.268000] ppdev: user-space parallel port driver
[ 300.000039] mce: [Hardware Error]: Machine check events logged
[ 405.974720] CPU0: Core temperature above threshold, cpu clock throttled (total events = 449)
[ 405.978243] CPU0: Core temperature/speed normal
[ 450.000067] mce: [Hardware Error]: Machine check events logged
[ 533.346540] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 533.392891] JFS: nTxBlock = 8192, nTxLock = 65536
[ 533.475532] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 533.551595] QNX4 filesystem 0.2.3 registered.
[ 533.579215] xor: measuring software checksum speed
[ 533.593891] pIII_sse : 4096.000 MB/sec
[ 533.604153] prefetch64-sse: 4240.000 MB/sec
[ 533.604164] xor: using function: prefetch64-sse (4240.000 MB/sec)
[ 533.632179] raid6: mmxx1 1539 MB/s
[ 533.655469] raid6: mmxx2 2156 MB/s
[ 533.676217] raid6: sse1x1 1070 MB/s
[ 533.694097] raid6: sse1x2 1234 MB/s
[ 533.711281] raid6: sse2x1 2214 MB/s
[ 533.737446] raid6: sse2x2 2062 MB/s
[ 533.737458] raid6: using algorithm sse2x1 (2214 MB/s)
[ 533.737462] raid6: using intx1 recovery algorithm
[ 533.765841] bio: create slab <bio> at 1
[ 533.772158] Btrfs loaded
[ 772.180843] CPU0: Core temperature above threshold, cpu clock throttled (total events = 539)
[ 772.184569] CPU0: Core temperature/speed normal
[ 975.000027] mce: [Hardware Error]: Machine check events logged
[ 5786.824049] tda1004x: setting up plls for 48MHz sampling clock
[ 5786.986051] tda1004x: found firmware revision 29 -- ok
[ 5790.562025] tda1004x: setting up plls for 48MHz sampling clock
[ 5790.723017] tda1004x: found firmware revision 29 -- ok
[21208.340026] tda1004x: setting up plls for 48MHz sampling clock
[21208.502043] tda1004x: found firmware revision 29 -- ok
[21234.843015] tda1004x: setting up plls for 48MHz sampling clock
[21235.015045] tda1004x: found firmware revision 29 -- ok
[22491.425021] tda1004x: setting up plls for 48MHz sampling clock
[22491.589017] tda1004x: found firmware revision 29 -- ok
[22506.668016] tda1004x: setting up plls for 48MHz sampling clock
[22506.833039] tda1004x: found firmware revision 29 -- ok
[22647.264038] tda1004x: setting up plls for 48MHz sampling clock
[22647.432024] tda1004x: found firmware revision 29 -- ok
[22702.077015] tda1004x: setting up plls for 48MHz sampling clock
[22702.248039] tda1004x: found firmware revision 29 -- ok
[22820.809027] tda1004x: setting up plls for 48MHz sampling clock
[22820.983061] tda1004x: found firmware revision 29 -- ok
[24624.618016] tda1004x: setting up plls for 48MHz sampling clock
[24624.782034] tda1004x: found firmware revision 29 -- ok
[24919.811015] tda1004x: setting up plls for 48MHz sampling clock
[24919.985045] tda1004x: found firmware revision 29 -- ok
[25661.636015] tda1004x: setting up plls for 48MHz sampling clock
[25661.810045] tda1004x: found firmware revision 29 -- ok
[26135.263023] tda1004x: setting up plls for 48MHz sampling clock
[26135.437040] tda1004x: found firmware revision 29 -- ok
[26284.032072] tda1004x: setting up plls for 48MHz sampling clock
[26284.194037] tda1004x: found firmware revision 29 -- ok
[26290.242020] tda1004x: setting up plls for 48MHz sampling clock
[26290.415029] tda1004x: found firmware revision 29 -- ok
[26472.977029] tda1004x: setting up plls for 48MHz sampling clock
[26473.151085] tda1004x: found firmware revision 29 -- ok
[44694.557107] tda1004x: setting up plls for 48MHz sampling clock
[44694.718108] tda1004x: found firmware revision 29 -- ok
[44729.047016] tda1004x: setting up plls for 48MHz sampling clock
[44729.215033] tda1004x: found firmware revision 29 -- ok
[44746.529056] tda1004x: setting up plls for 48MHz sampling clock
[44746.693029] tda1004x: found firmware rev |
|
|
| |
|
|
|
 |
|
slh
|
|
|
Post subject: RE: Too lag from last 2 nouveau upgrade
Posted: 17.11.2013, 16:44
|
|
Joined: 2010-08-25
Posts: 962
Status: Offline
|
|
If you install "mcelog", you should be able to read the "Machine Check Exceptions" your CPU is complaining about.
tda1004x seems to be a DVB card, it might be interesting to check what happens without it (if it's USB) - or to "modprobe -r" its modules for testing, while I don't think that these are causing your reboots, it's still worth checking. |
|
|
| |
|
|
|
|
|
pupiddo
|
|
|
|
Post subject: Xserver reboot and lags
Posted: 17.11.2013, 23:08
|
|
Joined: 2012-03-21
Posts: 10
Status: Offline
|
|
Hi,
from the 2 last nouveau upgrade my pc (Acer aspire SA80) is full of lags and suddendly Xserver reboots.
here is my dmesg:
[code:1:be03a60674]
0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12-0.slh.2-aptosid-686 (Debian 3.12-2) (s.l-h@gmx.de) (gcc version 4.8.2 (Debian 4.8.2-4) ) #1 SMP PREEMPT Thu Nov 14 22:23:11 UTC 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007bfeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bff0000-0x000000007bff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007bff3000-0x000000007bffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer Aspire SA80/E661GXM , BIOS R01-C3 03/28/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7bff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 2 base 0D8000000 mask FF8000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5a70-0x000f5a7f] mapped at [c00f5a70]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[ 0.000000] [mem 0x36400000-0x367fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[ 0.000000] [mem 0x30000000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[ 0.000000] [mem 0x36800000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01549000, 0x01549fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x368c0000-0x37457fff]
[ 0.000000] ACPI: RSDP 000f7500 00014 (v00 AWARD )
[ 0.000000] ACPI: RSDT 7bff3040 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7bff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7bff3180 03AC7 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7bff0000 00040
[ 0.000000] ACPI: APIC 7bff6cc0 00068 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1095MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0154a000, 0x0154afff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7bfeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7bfeffff]
[ 0.000000] On node 0 totalpages: 507790
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2192 pages used for memmap
[ 0.000000] HighMem zone: 280562 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x7c000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5ca7000 s27328 r0 d21824 u49152
[ 0.000000] pcpu-alloc: s27328 r0 d21824 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506014
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-0.slh.2-aptosid-686 root=UUID=441d3a40-59d6-43b8-b5c2-e59bf9a3cc73 ro single
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bff0)
[ 0.000000] Memory: 1996872K/2031160K available (3093K kernel code, 307K rwdata, 1208K rodata, 412K init, 348K bss, 34288K reserved, 1122248K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1482000 - 0xc14e9000 ( 412 kB)
[ 0.000000] .data : 0xc1305872 - 0xc1481fc0 (1521 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1305872 (3094 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 4063232 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3066.755 MHz processor
[ 0.003003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.51 BogoMIPS (lpj=3066755)
[ 0.003423] pid_max: default: 32768 minimum: 301
[ 0.003706] Security Framework initialized
[ 0.004015] SELinux: Disabled at boot.
[ 0.004238] Mount-cache hash table entries: 512
[ 0.004820] Initializing cgroup subsys memory
[ 0.005039] Initializing cgroup subsys devices
[ 0.005250] Initializing cgroup subsys freezer
[ 0.005459] Initializing cgroup subsys net_cls
[ 0.005668] Initializing cgroup subsys blkio
[ 0.005875] Initializing cgroup subsys perf_event
[ 0.006075] CPU0: Hyper-Threading is disabled
[ 0.006289] mce: CPU supports 4 MCE banks
[ 0.006514] CPU0: Thermal monitoring enabled (TM1)
[ 0.006750] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.006750] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[ 0.006750] tlb_flushall_shift: 6
[ 0.011301] ACPI: Core revision 20130725
[ 0.013620] ACPI: All ACPI Tables successfully acquired
[ 0.014196] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.014731] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.025348] smpboot: CPU0: Intel(R) Celeron(R) CPU 3.06GHz (fam: 0f, model: 04, stepping: 09)
[ 0.026000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.026000] ... version: 0
[ 0.026000] ... bit width: 40
[ 0.026000] ... generic registers: 18
[ 0.026000] ... value mask: 000000ffffffffff
[ 0.026004] ... max period: 0000007fffffffff
[ 0.026217] ... fixed-purpose events: 0
[ 0.026426] ... event mask: 000000000003ffff
[ 0.032107] Brought up 1 CPUs
[ 0.032335] smpboot: Total of 1 processors activated (6133.51 BogoMIPS)
[ 0.033288] devtmpfs: initialized
[ 0.034468] PM: Registering ACPI NVS region [mem 0x7bff0000-0x7bff2fff] (12288 bytes)
[ 0.034984] pinctrl core: initialized pinctrl subsystem
[ 0.035164] NET: Registered protocol family 16
[ 0.035555] cpuidle: using governor ladder
[ 0.036027] cpuidle: using governor menu
[ 0.036292] ACPI: bus type PCI registered
[ 0.036513] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.061358] PCI: PCI BIOS revision 2.10 entry at 0xfbda0, last bus=1
[ 0.061576] PCI: Using configuration type 1 for base access
[ 0.062791] bio: create slab <bio> at 0
[ 0.063222] ACPI: Added _OSI(Module Device)
[ 0.063436] ACPI: Added _OSI(Processor Device)
[ 0.063642] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.063852] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.064778] ACPI: EC: Look up EC in DSDT
[ 0.068763] ACPI: Interpreter enabled
[ 0.068990] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.069417] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.069890] ACPI: (supports S0 S3 S4 S5)
[ 0.070021] ACPI: Using IOAPIC for interrupt routing
[ 0.070293] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.070792] ACPI: No dock devices found.
[ 0.078149] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.078379] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.078752] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.079130] acpi PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
[ 0.079136] acpi PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
[ 0.079140] acpi PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
[ 0.079145] acpi PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
[ 0.079149] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.079153] acpi PNP0A03:00: host bridge window [mem 0x7c000000-0xfebfffff] (ignored)
[ 0.079157] PCI: root bus 00: using default resources
[ 0.079163] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.079838] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5)
[ 0.080012] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5)
[ 0.080224] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5)
[ 0.080440] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5)
[ 0.080652] ACPI: \_SB_.PCI0.LNKE: can't evaluate _ADR (0x5)
[ 0.081006] ACPI: \_SB_.PCI0.LNKF: can't evaluate _ADR (0x5)
[ 0.081227] ACPI: \_SB_.PCI0.LNKG: can't evaluate _ADR (0x5)
[ 0.081445] ACPI: \_SB_.PCI0.LNKH: can't evaluate _ADR (0x5)
[ 0.081663] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
[ 0.081884] ACPI: \_SB_.PCI0.PIC_: can't evaluate _ADR (0x5)
[ 0.082006] ACPI: \_SB_.PCI0.DMA1: can't evaluate _ADR (0x5)
[ 0.082232] ACPI: \_SB_.PCI0.TMR_: can't evaluate _ADR (0x5)
[ 0.082466] ACPI: \_SB_.PCI0.RTC_: can't evaluate _ADR (0x5)
[ 0.082686] ACPI: \_SB_.PCI0.SPKR: can't evaluate _ADR (0x5)
[ 0.083006] ACPI: \_SB_.PCI0.COPR: can't evaluate _ADR (0x5)
[ 0.083233] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
[ 0.083450] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
[ 0.083678] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
[ 0.083900] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
[ 0.084006] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
[ 0.084221] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
[ 0.084435] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
[ 0.084650] ACPI: \_SB_.PCI0.PSMR: can't evaluate _ADR (0x5)
[ 0.085005] PCI host bridge to bus 0000:00
[ 0.085221] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.085435] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.085650] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.085922] pci 0000:00:00.0: [1039:0661] type 00 class 0x060000
[ 0.086012] pci 0000:00:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff]
[ 0.086227] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
[ 0.086376] pci 0000:00:02.0: [1039:0964] type 00 class 0x060100
[ 0.086586] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[ 0.086625] pci 0000:00:02.5: reg 0x10: [io 0x01f0-0x01f7]
[ 0.086639] pci 0000:00:02.5: reg 0x14: [io 0x03f4-0x03f7]
[ 0.086652] pci 0000:00:02.5: reg 0x18: [io 0x0170-0x0177]
[ 0.086665] pci 0000:00:02.5: reg 0x1c: [io 0x0374-0x0377]
[ 0.086678] pci 0000:00:02.5: reg 0x20: [io 0x4000-0x400f]
[ 0.086735] pci 0000:00:02.5: PME# supported from D3cold
[ 0.086864] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[ 0.086888] pci 0000:00:02.7: reg 0x10: [io 0xd000-0xd0ff]
[ 0.086902] pci 0000:00:02.7: reg 0x14: [io 0xd400-0xd47f]
[ 0.086986] pci 0000:00:02.7: supports D1 D2
[ 0.086990] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.087133] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[ 0.087154] pci 0000:00:03.0: reg 0x10: [mem 0xe2102000-0xe2102fff]
[ 0.087300] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.087570] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[ 0.087589] pci 0000:00:03.1: reg 0x10: [mem 0xe2103000-0xe2103fff]
[ 0.087728] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 0.088018] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[ 0.088039] pci 0000:00:03.2: reg 0x10: [mem 0xe2104000-0xe2104fff]
[ 0.088184] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 0.088477] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[ 0.088501] pci 0000:00:03.3: reg 0x10: [mem 0xe2100000-0xe2100fff]
[ 0.088593] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.088675] pci 0000:00:03.3: System wakeup disabled by ACPI
[ 0.089072] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
[ 0.089098] pci 0000:00:04.0: reg 0x10: [io 0xd800-0xd8ff]
[ 0.089112] pci 0000:00:04.0: reg 0x14: [mem 0xe2101000-0xe2101fff]
[ 0.089164] pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.089201] pci 0000:00:04.0: supports D1 D2
[ 0.089204] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089286] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.089563] pci 0000:00:05.0: [1039:0180] type 00 class 0x010185
[ 0.089587] pci 0000:00:05.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.089600] pci 0000:00:05.0: reg 0x14: [io 0xe000-0xe003]
[ 0.089613] pci 0000:00:05.0: reg 0x18: [io 0xe400-0xe407]
[ 0.089626] pci 0000:00:05.0: reg 0x1c: [io 0xe800-0xe803]
[ 0.089639] pci 0000:00:05.0: reg 0x20: [io 0xec00-0xec0f]
[ 0.089695] pci 0000:00:05.0: PME# supported from D3cold
[ 0.090059] pci 0000:00:09.0: [10de:0322] type 00 class 0x030000
[ 0.090085] pci 0000:00:09.0: reg 0x10: [mem 0xe0000000-0xe0ffffff]
[ 0.090098] pci 0000:00:09.0: reg 0x14: [mem 0xc0000000-0xcfffffff pref]
[ 0.090148] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.090313] pci 0000:00:0b.0: [1131:7133] type 00 class 0x048000
[ 0.090339] pci 0000:00:0b.0: reg 0x10: [mem 0xe2105000-0xe21057ff]
[ 0.090431] pci 0000:00:0b.0: supports D1 D2
[ 0.090622] pci 0000:01:00.0: [1039:6330] type 00 class 0x030000
[ 0.090642] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.090651] pci 0000:01:00.0: reg 0x14: [mem 0xe2000000-0xe201ffff]
[ 0.090660] pci 0000:01:00.0: reg 0x18: [io 0xc000-0xc07f]
[ 0.090718] pci 0000:01:00.0: supports D1 D2
[ 0.090794] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.091012] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.091020] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe20fffff]
[ 0.091026] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.091039] pci_bus 0000:00: on NUMA node 0
[ 0.091282] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[ 0.092314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.093106] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.094010] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.094811] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.095599] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.096433] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 14 15)
[ 0.097112] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.098738] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.099023] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.099071] Found 1 acpi root devices
[ 0.099268] vgaarb: device added: PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.099654] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.100009] vgaarb: loaded
[ 0.100214] vgaarb: bridge control possible 0000:01:00.0
[ 0.100423] vgaarb: no bridge control possible 0000:00:09.0
[ 0.100757] PCI: Using ACPI for IRQ routing
[ 0.101013] PCI: pci_cache_line_size set to 64 bytes
[ 0.101077] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.101082] e820: reserve RAM buffer [mem 0x7bff0000-0x7bffffff]
[ 0.101285] NetLabel: Initializing
[ 0.101498] NetLabel: domain hash size = 128
[ 0.101706] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.101933] NetLabel: unlabeled traffic allowed by default
[ 0.102098] Switched to clocksource refined-jiffies
[ 0.102404] pnp: PnP ACPI init
[ 0.102639] ACPI: bus type PNP registered
[ 0.103359] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.103582] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.103795] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.104015] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.104230] system 00:00: [mem 0x7bff0000-0x7bffffff] could not be reserved
[ 0.104443] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.104657] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.104870] system 00:00: [mem 0x00100000-0x7bfeffff] could not be reserved
[ 0.105007] system 00:00: [mem 0xffee0000-0xffefffff] has been reserved
[ 0.105222] system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved
[ 0.105435] system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.105648] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.106010] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.106436] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.106655] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.106866] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.107014] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.107230] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107261] pnp 00:02: [dma 4]
[ 0.107310] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.107385] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.107447] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.107510] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.108135] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.108534] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.109022] pnp 00:08: [dma 3]
[ 0.109131] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.109288] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.109338] pnp: PnP ACPI: found 10 devices
[ 0.109550] ACPI: bus type PNP unregistered
[ 0.147426] Switched to clocksource acpi_pm
[ 0.147695] pci 0000:00:04.0: BAR 6: assigned [mem 0x7c000000-0x7c01ffff pref]
[ 0.147993] pci 0000:00:09.0: BAR 6: assigned [mem 0x7c020000-0x7c03ffff pref]
[ 0.148093] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.148311] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.148554] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe20fffff]
[ 0.148781] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.149197] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.149202] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.149206] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.149210] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe20fffff]
[ 0.149213] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
[ 0.149289] NET: Registered protocol family 2
[ 0.149866] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.150184] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.150461] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.150791] TCP: reno registered
[ 0.151056] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.151308] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.151692] NET: Registered protocol family 1
[ 0.374467] pci 0000:00:09.0: Boot video device
[ 0.374483] PCI: CLS 32 bytes, default 64
[ 0.374598] Unpacking initramfs...
[ 0.907558] Freeing initrd memory: 11872K (f68c0000 - f7458000)
[ 0.908073] microcode: CPU0 sig=0xf49, pf=0x10, revision=0x0
[ 0.908389] microcode: Microcode Update Driver: v2.00 <tigran>, Peter Oruba
[ 0.909257] audit: initializing netlink socket (disabled)
[ 0.909514] type=2000 audit(1384600901.908:1): initialized
[ 0.910261] bounce pool size: 64 pages
[ 0.910495] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.912964] zbud: loaded
[ 0.913447] VFS: Disk quotas dquot_6.5.2
[ 0.913745] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.914211] msgmni has been set to 1731
[ 0.915157] alg: No test for stdrng (krng)
[ 0.915384] Key type asymmetric registered
[ 0.915592] Asymmetric key parser 'x509' registered
[ 0.915899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.916400] io scheduler noop registered
[ 0.916610] io scheduler deadline registered
[ 0.916890] io scheduler cfq registered (default)
[ 0.917328] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.917576] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.917881] GHES: HEST is not enabled!
[ 0.918286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.939184] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.960225] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.961194] Linux agpgart interface v0.103
[ 0.961521] libphy: Fixed MDIO Bus: probed
[ 0.961805] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.962051] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.962614] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.962993] mousedev: PS/2 mouse device common for all mice
[ 0.963344] rtc_cmos 00:03: RTC can wake from S4
[ 0.963745] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.963996] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
[ 0.964646] TCP: cubic registered
[ 0.965090] NET: Registered protocol family 10
[ 0.965717] Key type dns_resolver registered
[ 0.966216] Using IPI No-Shortcut mode
[ 0.966607] registered taskstats version 1
[ 0.967094] IMA: No TPM chip found, activating TPM-bypass!
[ 0.967786] rtc_cmos 00:03: setting system clock to 2013-11-16 11:21:42 UTC (1384600902)
[ 0.968964] Freeing unused kernel memory: 412K (c1482000 - c14e9000)
[ 0.994649] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.056456] systemd-udevd[56]: starting version 204
[ 1.210422] SCSI subsystem initialized
[ 1.234593] ACPI: bus type USB registered
[ 1.234870] usbcore: registered new interface driver usbfs
[ 1.243155] usbcore: registered new interface driver hub
[ 1.246737] usbcore: registered new device driver usb
[ 1.249180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.249986] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.258159] libata version 3.00 loaded.
[ 1.258716] pata_sis 0000:00:02.5: version 0.5.2
[ 1.258972] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 1.267501] ohci-pci: OHCI PCI platform driver
[ 1.277240] scsi0 : pata_sis
[ 1.281105] scsi1 : pata_sis
[ 1.281453] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 1.281684] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 1.288567] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 1.288801] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 1.289308] ohci-pci 0000:00:03.0: irq 20, io mem 0xe2102000
[ 1.336670] ehci-pci: EHCI PCI platform driver
[ 1.337740] sis900.c: v1.08.10 Apr. 2 2006
[ 1.342172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.342395] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.342762] usb usb1: Product: OHCI PCI host controller
[ 1.342970] usb usb1: Manufacturer: Linux 3.12-0.slh.2-aptosid-686 ohci_hcd
[ 1.343197] usb usb1: SerialNumber: 0000:00:03.0
[ 1.344256] hub 1-0:1.0: USB hub found
[ 1.345064] hub 1-0:1.0: 3 ports detected
[ 1.345933] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 1.346214] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 2
[ 1.346672] ehci-pci 0000:00:03.3: irq 23, io mem 0xe2100000
[ 1.352087] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.352424] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.352641] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.353058] usb usb2: Product: EHCI Host Controller
[ 1.353269] usb usb2: Manufacturer: Linux 3.12-0.slh.2-aptosid-686 ehci_hcd
[ 1.353482] usb usb2: SerialNumber: 0000:00:03.3
[ 1.353953] hub 2-0:1.0: USB hub found
[ 1.354239] hub 2-0:1.0: 8 ports detected
[ 1.403206] hub 1-0:1.0: USB hub found
[ 1.403447] hub 1-0:1.0: 3 ports detected
[ 1.413659] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 9.
[ 1.439639] 0000:00:04.0: Using transceiver found at address 9 as default
[ 1.442623] eth0: SiS 900 PCI Fast Ethernet at 0x0001d800, IRQ 19, 00:16:ec:60:b2:62
[ 1.446116] sata_sis 0000:00:05.0: version 1.0
[ 1.446340] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 1.450107] scsi2 : sata_sis
[ 1.452457] ata1.00: ATAPI: HL-DT-ST DVD-RW_GSA-H11N, JH02, max UDMA/66
[ 1.452852] scsi3 : sata_sis
[ 1.453215] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xec00 irq 17
[ 1.453443] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe800 bmdma 0xec08 irq 17
[ 1.454244] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 1.454496] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.454931] ohci-pci 0000:00:03.1: irq 21, io mem 0xe2103000
[ 1.474454] ata1.00: configured for UDMA/66
[ 1.481217] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW_GSA-H11N JH02 PQ: 0 ANSI: 5
[ 1.508420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.508646] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.509038] usb usb3: Product: OHCI PCI host controller
[ 1.509249] usb usb3: Manufacturer: Linux 3.12-0.slh.2-aptosid-686 ohci_hcd
[ 1.529688] usb usb3: SerialNumber: 0000:00:03.1
[ 1.531422] hub 3-0:1.0: USB hub found
[ 1.532494] hub 3-0:1.0: 3 ports detected
[ 1.534474] ohci-pci 0000:00:03.2: OHCI PCI host controller
[ 1.534707] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 1.538460] ohci-pci 0000:00:03.2: irq 22, io mem 0xe2104000
[ 1.591277] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.591504] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.591878] usb usb4: Product: OHCI PCI host controller
[ 1.592119] usb usb4: Manufacturer: Linux 3.12-0.slh.2-aptosid-686 ohci_hcd
[ 1.592336] usb usb4: SerialNumber: 0000:00:03.2
[ 1.593426] hub 4-0:1.0: USB hub found
[ 1.593779] hub 4-0:1.0: 2 ports detected
[ 1.758064] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.761627] ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.761841] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.768607] ata3.00: configured for UDMA/133
[ 1.779227] scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.908097] tsc: Refined TSC clocksource calibration: 3066.775 MHz
[ 2.084075] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.125087] ata4.00: ATA-7: ST3160812AS, 3.AAE, max UDMA/133
[ 2.125306] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.200054] ata4.00: configured for UDMA/133
[ 2.211208] scsi 3:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5
[ 2.251176] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.251400] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.252955] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.259163] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.259657] sd 2:0:0:0: [sda] Write Protect is off
[ 2.259868] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.259912] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.262369] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.262854] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.263098] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.263157] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.269226] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.269685] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.270513] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.281454] sdb: sdb1
[ 2.282342] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.282943] sda: sda1 sda2 sda3
[ 2.283934] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.682069] usb 1-2: new full-speed USB device number 2 using ohci-pci
[ 2.868832] usb 1-2: New USB device found, idVendor=06f8, idProduct=3004
[ 2.869068] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.869288] usb 1-2: Product: USB camera
[ 2.908100] Switched to clocksource tsc
[ 3.029039] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 3.218070] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[ 3.218295] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.218517] usb 3-1: Product: USB Optical Mouse
[ 3.218734] usb 3-1: Manufacturer: Logitech
[ 3.228570] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.237242] usbcore: registered new interface driver usbhid
[ 3.237472] usbhid: USB HID core driver
[ 3.244921] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input1
[ 3.245879] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-1/input0
[ 3.487036] usb 3-2: new full-speed USB device number 3 using ohci-pci
[ 3.679984] usb 3-2: New USB device found, idVendor=058f, idProduct=9360
[ 3.680215] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.680430] usb 3-2: Product: USB Reader
[ 3.680638] usb 3-2: Manufacturer:
[ 3.680842] usb 3-2: SerialNumber: 2004888
[ 3.689707] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 3.690099] scsi4 : usb-storage 3-2:1.0
[ 3.691236] usbcore: registered new interface driver usb-storage
[ 4.170131] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.170355] ACPI: Thermal Zone [THRM] (78 C)
[ 4.171224] ACPI: Fan [FAN] (on)
[ 4.217709] PM: Starting manual resume from disk
[ 4.274814] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.700858] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 4.707871] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 4.714851] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 4.721874] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 4.723350] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 4.723910] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 4.724491] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 4.725183] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 4.820832] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 4.831837] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 4.842830] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 4.853836] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 6.022473] systemd-udevd[332]: starting version 204
[ 6.710336] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.710756] ACPI: Power Button [PWRB]
[ 6.711183] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 6.711582] ACPI: Sleep Button [FUTS]
[ 6.711922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.712369] ACPI: Power Button [PWRF]
[ 6.730720] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[ 6.784236] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[ 6.797637] IT8705 SuperIO detected.
[ 6.798238] parport_pc 00:08: reported by Plug and Play ACPI
[ 6.798533] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 7.152802] [drm] Initialized drm 1.1.0 20060810
[ 7.204499] wmi: Mapper loaded
[ 7.235766] [drm] hdmi device not found 0 9 1
[ 7.238104] nouveau [ DEVICE][0000:00:09.0] BOOT0 : 0x034200b1
[ 7.238327] nouveau [ DEVICE][0000:00:09.0] Chipset: NV34 (NV34)
[ 7.238539] nouveau [ DEVICE][0000:00:09.0] Family : NV30
[ 7.240125] nouveau [ VBIOS][0000:00:09.0] checking PRAMIN for image...
[ 7.342270] media: Linux media interface: v0.10
[ 7.355711] Linux video capture interface: v2.00
[ 7.411790] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 7.432139] nouveau [ VBIOS][0000:00:09.0] ... appears to be valid
[ 7.432370] nouveau [ VBIOS][0000:00:09.0] using image from PRAMIN
[ 7.432590] nouveau [ VBIOS][0000:00:09.0] BMP version 5.28
[ 7.433019] nouveau [ VBIOS][0000:00:09.0] version 04.34.20.56.00
[ 7.437495] nouveau W[ PTIMER][0000:00:09.0] unknown input clock freq
[ 7.437727] nouveau [ PFB][0000:00:09.0] RAM type: DDR1
[ 7.437943] nouveau [ PFB][0000:00:09.0] RAM size: 256 MiB
[ 7.438188] nouveau [ PFB][0000:00:09.0] ZCOMP: 0 tags
[ 7.444654] [TTM] Zone kernel: Available graphics memory: 443454 kiB
[ 7.444880] [TTM] Zone highmem: Available graphics memory: 1004578 kiB
[ 7.445113] [TTM] Initializing pool allocator
[ 7.445355] nouveau [ DRM] VRAM: 255 MiB
[ 7.445575] nouveau [ DRM] GART: 128 MiB
[ 7.446167] nouveau [ DRM] BMP version 5.40
[ 7.446395] nouveau [ DRM] DCB version 2.2
[ 7.446614] nouveau [ DRM] DCB outp 00: 01000300 000088b8
[ 7.446834] nouveau [ DRM] DCB outp 01: 02010310 000088b8
[ 7.447069] nouveau [ DRM] DCB outp 02: 01010312 00000000
[ 7.447289] nouveau [ DRM] DCB outp 03: 02020321 00000333
[ 7.447670] nouveau [ DRM] Loading NV17 power sequencing microcode
[ 7.448627] nouveau [ DRM] Saving VGA fonts
[ 7.513680] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.513917] [drm] No driver support for vblank timestamp query.
[ 7.517747] nouveau [ DRM] 0xE085: Parsing digital output script table
[ 7.594898] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.609797] nouveau [ DRM] 0 available performance level(s)
[ 7.610035] nouveau [ DRM] c: core 249MHz memory 330MHz
[ 7.611398] nouveau [ DRM] MM: using M2MF for buffer copies
[ 7.611639] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 7.688999] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo f70de200
[ 7.691849] fbcon: nouveaufb (fb0) is primary device
[ 7.719503] nouveau [ DRM] 0xE085: Parsing digital output script table
[ 7.775589] Console: switching to colour frame buffer device 160x64
[ 7.778247] nouveau 0000:00:09.0: fb0: nouveaufb frame buffer device
[ 7.778268] nouveau 0000:00:09.0: registered panic notifier
[ 7.778294] [drm] Initialized nouveau 1.1.1 20120801 for 0000:00:09.0 on minor 0
[ 8.159099] intel8x0_measure_ac97_clock: measured 50304 usecs (2421 samples)
[ 8.159144] intel8x0: clocking to 48000
[ 8.160294] saa7133[0]: found at 0000:00:0b.0, rev: 209, irq: 19, latency: 32, mmio: 0xe2105000
[ 8.160351] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[ 8.160406] saa7133[0]: board init: gpio is 6400000
[ 8.492118] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 8.492203] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[ 8.492261] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[ 8.492319] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.492375] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[ 8.492432] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492489] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492547] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492604] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 f2 20 4c f0 73 05 29 00
[ 8.492660] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[ 8.492716] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[ 8.492776] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 e0 00 00 00 00 00 00 00 00 00
[ 8.492833] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492890] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.492946] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.497094] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 8.498719] tveeprom 3-0050: Hauppauge model 67019, rev B4B4, serial# 4989170
[ 8.498764] tveeprom 3-0050: MAC address is 00:0d:fe:4c:20:f2
[ 8.498784] tveeprom 3-0050: tuner model is Philips 8275A (idx 114, type 4)
[ 8.498805] tveeprom 3-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 8.498833] tveeprom 3-0050: audio processor is SAA7131 (idx 41)
[ 8.498850] tveeprom 3-0050: decoder processor is SAA7131 (idx 35)
[ 8.498867] tveeprom 3-0050: has radio, has IR receiver, has IR transmitter
[ 8.498885] saa7133[0]: hauppauge eeprom: model=67019
[ 8.513907] gspca_main: v2.14.0 registered
[ 8.515878] gspca_main: sonixj-2.14.0 probing 06f8:3004
[ 8.533072] input: sonixj as /devices/pci0000:00/0000:00:03.0/usb1/1-2/input/input6
[ 8.533451] usbcore: registered new interface driver sonixj
[ 8.685122] tuner 3-004b: Tuner -1 found with type(s) Radio TV.
[ 8.753064] tda829x 3-004b: setting tuner address to 61
[ 8.801133] tda829x 3-004b: type set to tda8290+75a
[ 8.826302] usbcore: registered new interface driver snd-usb-audio
[ 11.823020] Registered IR keymap rc-hauppauge
[ 11.823849] input: i2c IR (HVR 1110) as /devices/virtual/rc/rc0/input7
[ 11.827155] rc0: i2c IR (HVR 1110) as /devices/virtual/rc/rc0
[ 11.827778] ir-kbd-i2c: i2c IR (HVR 1110) detected at i2c-3/3-0071/ir0 [saa7133[0]]
[ 11.864303] saa7133[0]: registered device video1 [v4l2]
[ 11.865239] saa7133[0]: registered device vbi0
[ 11.866222] saa7133[0]: registered device radio0
[ 11.906974] dvb_init() allocating 1 frontend
[ 11.926035] DVB: registering new adapter (saa7133[0])
[ 11.926695] saa7134 0000:00:0b.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 11.991016] tda1004x: setting up plls for 48MHz sampling clock
[ 12.184012] tda1004x: found firmware revision 29 -- ok
[ 12.359354] saa7134 ALSA driver for DMA sound loaded
[ 12.360167] saa7133[0]/alsa: saa7133[0] at 0xe2105000 irq 19 registered as card -1
[ 14.119206] Adding 1036188k swap on /dev/sda2. Priority:-1 extents:1 across:1036188k FS
[ 14.175289] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 14.446628] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.140226] device-mapper: uevent: version 1.0.3
[ 15.143342] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 16.708123] fuse init (API version 7.22)
[ 16.772403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,user_xattr
[ 16.790540] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 18.610531] NET: Registered protocol family 17
[ 19.536383] eth0: Media Link Off
[ 24.578624] eth0: Media Link On 100mbps full-duplex
[ 39.581595] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 39.582003] CPU0: Core temperature/speed normal
[ 63.225862] usb 3-1: USB disconnect, device number 2
[ 64.770090] usb 3-1: new low-speed USB device number 4 using ohci-pci
[ 64.959521] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[ 64.960278] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 64.960940] usb 3-1: Product: USB Optical Mouse
[ 64.961598] usb 3-1: Manufacturer: Logitech
[ 64.976999] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input8
[ 64.978090] hid-generic 0003:046D:C05A.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-1/input0
[ 124.965214] usb 3-1: USB disconnect, device number 4
[ 126.509031] usb 3-1: new low-speed USB device number 5 using ohci-pci
[ 126.698844] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[ 126.699598] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 126.700346] usb 3-1: Product: USB Optical Mouse
[ 126.701075] usb 3-1: Manufacturer: Logitech
[ 126.715798] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input9
[ 126.716950] hid-generic 0003:046D:C05A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-1/input0
[ 186.704601] usb 3-1: USB disconnect, device number 5
[ 188.249038] usb 3-1: new low-speed USB device number 6 using ohci-pci
[ 188.438230] usb 3-1: New USB device found, idVendor=046d, idProduct=c05a
[ 188.439002] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 188.439793] usb 3-1: Product: USB Optical Mouse
[ 188.440571] usb 3-1: Manufacturer: Logitech
[ 188.455135] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input10
[ 188.456280] hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-1/input0
[ 198.100753] vgaarb: device changed decodes: PCI:0000:00:09.0,olddecodes=io+mem,decodes=none:owns=none
[ 204.171177] lp0: using parport0 (interrupt-driven).
[ 204.171188] lp0: console ready
[ 204.268000] ppdev: user-space parallel port driver
[ 300.000039] mce: [Hardware Error]: Machine check events logged
[ 405.974720] CPU0: Core temperature above threshold, cpu clock throttled (total events = 449)
[ 405.978243] CPU0: Core temperature/speed normal
[ 450.000067] mce: [Hardware Error]: Machine check events logged
[ 533.346540] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 533.392891] JFS: nTxBlock = 8192, nTxLock = 65536
[ 533.475532] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 533.551595] QNX4 filesystem 0.2.3 registered.
[ 533.579215] xor: measuring software checksum speed
[ 533.593891] pIII_sse : 4096.000 MB/sec
[ 533.604153] prefetch64-sse: 4240.000 MB/sec
[ 533.604164] xor: using function: prefetch64-sse (4240.000 MB/sec)
[ 533.632179] raid6: mmxx1 1539 MB/s
[ 533.655469] raid6: mmxx2 2156 MB/s
[ 533.676217] raid6: sse1x1 1070 MB/s
[ 533.694097] raid6: sse1x2 1234 MB/s
[ 533.711281] raid6: sse2x1 2214 MB/s
[ 533.737446] raid6: sse2x2 2062 MB/s
[ 533.737458] raid6: using algorithm sse2x1 (2214 MB/s)
[ 533.737462] raid6: using intx1 recovery algorithm
[ 533.765841] bio: create slab <bio> at 1
[ 533.772158] Btrfs loaded
[ 772.180843] CPU0: Core temperature above threshold, cpu clock throttled (total events = 539)
[ 772.184569] CPU0: Core temperature/speed normal
[ 975.000027] mce: [Hardware Error]: Machine check events logged
[ 5786.824049] tda1004x: setting up plls for 48MHz sampling clock
[ 5786.986051] tda1004x: found firmware revision 29 -- ok
[ 5790.562025] tda1004x: setting up plls for 48MHz sampling clock
[ 5790.723017] tda1004x: found firmware revision 29 -- ok
[21208.340026] tda1004x: setting up plls for 48MHz sampling clock
[21208.502043] tda1004x: found firmware revision 29 -- ok
[21234.843015] tda1004x: setting up plls for 48MHz sampling clock
[21235.015045] tda1004x: found firmware revision 29 -- ok
[22491.425021] tda1004x: setting up plls for 48MHz sampling clock
[22491.589017] tda1004x: found firmware revision 29 -- ok
[22506.668016] tda1004x: setting up plls for 48MHz sampling clock
[22506.833039] tda1004x: found firmware revision 29 -- ok
[22647.264038] tda1004x: setting up plls for 48MHz sampling clock
[22647.432024] tda1004x: found firmware revision 29 -- ok
[22702.077015] tda1004x: setting up plls for 48MHz sampling clock
[22702.248039] tda1004x: found firmware revision 29 -- ok
[22820.809027] tda1004x: setting up plls for 48MHz sampling clock
[22820.983061] tda1004x: found firmware revision 29 -- ok
[24624.618016] tda1004x: setting up plls for 48MHz sampling clock
[24624.782034] tda1004x: found firmware revision 29 -- ok
[24919.811015] tda1004x: setting up plls for 48MHz sampling clock
[24919.985045] tda1004x: found firmware revision 29 -- ok
[25661.636015] tda1004x: setting up plls for 48MHz sampling clock
[25661.810045] tda1004x: found firmware revision 29 -- ok
[26135.263023] tda1004x: setting up plls for 48MHz sampling clock
[26135.437040] tda1004x: found firmware revision 29 -- ok
[26284.032072] tda1004x: setting up plls for 48MHz sampling clock
[26284.194037] tda1004x: found firmware revision 29 -- ok
[26290.242020] tda1004x: setting up plls for 48MHz sampling clock
[26290.415029] tda1004x: found firmware revision 29 -- ok
[26472.977029] tda1004x: setting up plls for 48MHz sampling clock
[26473.151085] tda1004x: found firmware revision 29 -- ok
[44694.557107] tda1004x: setting up plls for 48MHz sampling clock
[44694.718108] tda1004x: found firmware revision 29 -- ok
[44729.047016] tda1004x: setting up plls for 48MHz sampling clock
[44729.215033] tda1004x: found firmware revision 29 -- ok
[44746.529056] tda1004x: setting up plls for 48MHz sampling clock
[44746.693029] tda1004x: found firmware revision 29 -- ok
[44766.424027] tda1004x: setting up plls for 48MHz sampling clock
[44766.593025] tda1004x: found fi |
|
|
| |
|
|
|
|
|
pupiddo
|
|
|
Post subject: Re: Xserver reboot and lags
Posted: 17.11.2013, 23:12
|
|
Joined: 2012-03-21
Posts: 10
Status: Offline
|
|
Sorry, but preview is correct and this is the results 
here the second dmesg part:
Code:
[44766.593025] tda1004x: found firmware revision 29 -- ok
[44774.093017] tda1004x: setting up plls for 48MHz sampling clock
[44774.259018] tda1004x: found firmware revision 29 -- ok
[45914.034017] tda1004x: setting up plls for 48MHz sampling clock
[45914.199035] tda1004x: found firmware revision 29 -- ok
[80047.042062] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1187)
[80047.045772] CPU0: Core temperature/speed normal
[80325.000025] mce: [Hardware Error]: Machine check events logged
[80440.958905] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1384)
[80440.960554] CPU0: Core temperature/speed normal
[80475.000030] mce: [Hardware Error]: Machine check events logged
[80943.053575] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1436)
[80943.055075] CPU0: Core temperature/speed normal
[81000.000065] mce: [Hardware Error]: Machine check events logged
[81412.542587] CPU0: Core temperature above threshold, cpu clock throttled (total events = 3343)
[81412.546249] CPU0: Core temperature/speed normal
[81450.000092] mce: [Hardware Error]: Machine check events logged
[83653.156821] CPU0: Core temperature above threshold, cpu clock throttled (total events = 3692)
[83653.160288] CPU0: Core temperature/speed normal
[83700.000033] mce: [Hardware Error]: Machine check events logged
[84179.498094] CPU0: Core temperature above threshold, cpu clock throttled (total events = 3937)
[84179.501607] CPU0: Core temperature/speed normal
[84450.000052] mce: [Hardware Error]: Machine check events logged
[85915.523176] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4088)
[85915.526758] CPU0: Core temperature/speed normal
[86100.000032] mce: [Hardware Error]: Machine check events logged
[87265.779065] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4096)
[87265.782786] CPU0: Core temperature/speed normal
[87450.000051] mce: [Hardware Error]: Machine check events logged
[88686.555078] usb 2-6: new high-speed USB device number 5 using ehci-pci
[88686.837740] usb 2-6: New USB device found, idVendor=048d, idProduct=1336
[88686.837752] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[88686.837756] usb 2-6: Product: Mass Storage Device
[88686.837760] usb 2-6: Manufacturer: Generic
[88686.837764] usb 2-6: SerialNumber: 00000000000006
[88686.840728] usb-storage 2-6:1.0: USB Mass Storage device detected
[88686.840921] scsi5 : usb-storage 2-6:1.0
[88688.715357] scsi 5:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
[88688.717763] sd 5:0:0:0: Attached scsi generic sg7 type 0
[88688.719605] sd 5:0:0:0: [sdg] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[88688.720428] sd 5:0:0:0: [sdg] Write Protect is off
[88688.720440] sd 5:0:0:0: [sdg] Mode Sense: 03 00 00 00
[88688.721421] sd 5:0:0:0: [sdg] No Caching mode page found
[88688.721432] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[88688.725814] sd 5:0:0:0: [sdg] No Caching mode page found
[88688.725826] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[88688.727872] sdg: sdg1
[88688.731609] sd 5:0:0:0: [sdg] No Caching mode page found
[88688.731620] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[88688.731629] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[88988.475244] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4101)
[88988.478873] CPU0: Core temperature/speed normal
[89057.371749] sdg: detected capacity change from 1977614336 to 0
[89062.653337] usb 2-6: USB disconnect, device number 5
[89085.321080] usb 2-6: new high-speed USB device number 6 using ehci-pci
[89085.603817] usb 2-6: New USB device found, idVendor=048d, idProduct=1336
[89085.603829] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[89085.603834] usb 2-6: Product: Mass Storage Device
[89085.603838] usb 2-6: Manufacturer: Generic
[89085.603842] usb 2-6: SerialNumber: 00000000000006
[89085.606496] usb-storage 2-6:1.0: USB Mass Storage device detected
[89085.608075] scsi6 : usb-storage 2-6:1.0
[89087.631774] scsi 6:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
[89087.634696] sd 6:0:0:0: Attached scsi generic sg7 type 0
[89087.635872] sd 6:0:0:0: [sdg] 63076352 512-byte logical blocks: (32.2 GB/30.0 GiB)
[89087.637123] sd 6:0:0:0: [sdg] Write Protect is off
[89087.637134] sd 6:0:0:0: [sdg] Mode Sense: 03 00 00 00
[89087.637886] sd 6:0:0:0: [sdg] No Caching mode page found
[89087.637897] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[89087.643245] sd 6:0:0:0: [sdg] No Caching mode page found
[89087.643257] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[89087.644811] sdg: sdg1
[89087.648244] sd 6:0:0:0: [sdg] No Caching mode page found
[89087.648256] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[89087.648264] sd 6:0:0:0: [sdg] Attached SCSI removable disk
[89088.322389] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[89100.000057] mce: [Hardware Error]: Machine check events logged
[89460.312695] sdg: detected capacity change from 32295092224 to 0
[89465.882157] usb 2-6: USB disconnect, device number 6
[90368.169016] tda1004x: setting up plls for 48MHz sampling clock
[90368.336030] tda1004x: found firmware revision 29 -- ok
[110990.348020] tda1004x: setting up plls for 48MHz sampling clock
[110990.512203] tda1004x: found firmware revision 29 -- ok
[111189.204343] tda1004x: setting up plls for 48MHz sampling clock
[111189.369022] tda1004x: found firmware revision 29 -- ok
[111410.525075] tda1004x: setting up plls for 48MHz sampling clock
[111410.691022] tda1004x: found firmware revision 29 -- ok
[112800.548028] tda1004x: setting up plls for 48MHz sampling clock
[112800.714017] tda1004x: found firmware revision 29 -- ok
[112850.338015] tda1004x: setting up plls for 48MHz sampling clock
[112850.503081] tda1004x: found firmware revision 29 -- ok
[113116.457025] tda1004x: setting up plls for 48MHz sampling clock
[113116.621023] tda1004x: found firmware revision 29 -- ok
[113152.818080] tda1004x: setting up plls for 48MHz sampling clock
[113152.986068] tda1004x: found firmware revision 29 -- ok
[116111.973509] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4154)
[116111.974985] CPU0: Core temperature/speed normal
[116250.000033] mce: [Hardware Error]: Machine check events logged
[119717.439580] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4163)
[119717.441208] CPU0: Core temperature/speed normal
[120000.000027] mce: [Hardware Error]: Machine check events logged
[129574.434059] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4164)
[129574.437551] CPU0: Core temperature/speed normal
[129750.000045] mce: [Hardware Error]: Machine check events logged
[129876.531292] CPU0: Core temperature above threshold, cpu clock throttled (total events = 4386)
[129876.534728] CPU0: Core temperature/speed normal
[129900.000049] mce: [Hardware Error]: Machine check events logged
I know the temperature problems but I'd just spread the thermal paste on CPU and mouse work properly.
here is my lspci:
Code:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] LPC Controller (rev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA [SiS] (rev 01)
00:09.0 VGA compatible controller: NVIDIA Corporation NV34 [GeForce FX 5200] (rev a1)
00:0b.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
and lsusb:
Code:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 003 Device 006: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 06f8:3004 Guillemot Corp. Hercules Classic Silver
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Any suggestion different from "buy a new PC"? |
|
|
| |
|
|
|
|
|
pupiddo
|
|
|
Post subject: Re: RE: Too lag from last 2 nouveau upgrade
Posted: 17.11.2013, 23:26
|
|
Joined: 2012-03-21
Posts: 10
Status: Offline
|
|
|
slh wrote:
If you install "mcelog", you should be able to read the "Machine Check Exceptions" your CPU is complaining about.
tda1004x seems to be a DVB card, it might be interesting to check what happens without it (if it's USB) - or to "modprobe -r" its modules for testing, while I don't think that these are causing your reboots, it's still worth checking.
Thanks slh!
this is cat /var/log/mcelog
Code:
mcelog: failed to prefill DIMM database from DMI data
Kernel does not support page offline interface
Hardware event. This is not a software error.
MCE 0
CPU 0 THERMAL EVENT TSC 2aae18f292
TIME 1384597340 Sat Nov 16 11:22:20 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 1
CPU 0 THERMAL EVENT TSC 2ab1bdab8b
TIME 1384597340 Sat Nov 16 11:22:20 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 2
CPU 0 THERMAL EVENT TSC 130455b14de
TIME 1384597706 Sat Nov 16 11:28:26 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 3
CPU 0 THERMAL EVENT TSC 13045fed8d6
TIME 1384597706 Sat Nov 16 11:28:26 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 4
CPU 0 THERMAL EVENT TSC 235c1a65e88
TIME 1384598072 Sat Nov 16 11:34:32 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 5
CPU 0 THERMAL EVENT TSC 235c253f288
TIME 1384598072 Sat Nov 16 11:34:32 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 6
CPU 0 THERMAL EVENT TSC df531d7e0d8c
TIME 1384677347 Sun Nov 17 09:35:47 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 7
CPU 0 THERMAL EVENT TSC df531e2ae176
TIME 1384677347 Sun Nov 17 09:35:47 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 8
CPU 0 THERMAL EVENT TSC e06c6324c454
TIME 1384677741 Sun Nov 17 09:42:21 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 9
CPU 0 THERMAL EVENT TSC e06c6370b109
TIME 1384677741 Sun Nov 17 09:42:21 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 10
CPU 0 THERMAL EVENT TSC e1d2e70ddc9c
TIME 1384678243 Sun Nov 17 09:50:43 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 11
CPU 0 THERMAL EVENT TSC e1d2e75303f6
TIME 1384678243 Sun Nov 17 09:50:43 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 12
CPU 0 THERMAL EVENT TSC e32222d88183
TIME 1384678713 Sun Nov 17 09:58:33 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 13
CPU 0 THERMAL EVENT TSC e3222382cf50
TIME 1384678713 Sun Nov 17 09:58:33 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 14
CPU 0 THERMAL EVENT TSC e96205c3879e
TIME 1384680953 Sun Nov 17 10:35:53 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 15
CPU 0 THERMAL EVENT TSC e96206650b54
TIME 1384680953 Sun Nov 17 10:35:53 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 16
CPU 0 THERMAL EVENT TSC ead9d9cf378c
TIME 1384681480 Sun Nov 17 10:44:40 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 17
CPU 0 THERMAL EVENT TSC ead9da72daa2
TIME 1384681480 Sun Nov 17 10:44:40 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 18
CPU 0 THERMAL EVENT TSC efb170d761d6
TIME 1384683216 Sun Nov 17 11:13:36 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 19
CPU 0 THERMAL EVENT TSC efb1717e24aa
TIME 1384683216 Sun Nov 17 11:13:36 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 20
CPU 0 THERMAL EVENT TSC f37593909c2a
TIME 1384684566 Sun Nov 17 11:36:06 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 21
CPU 0 THERMAL EVENT TSC f375943de6da
TIME 1384684566 Sun Nov 17 11:36:06 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 22
CPU 0 THERMAL EVENT TSC f843a626f4f8
TIME 1384686289 Sun Nov 17 12:04:49 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 23
CPU 0 THERMAL EVENT TSC f843a6cff848
TIME 1384686289 Sun Nov 17 12:04:49 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 24
CPU 0 THERMAL EVENT TSC 143eae3df483e
TIME 1384713412 Sun Nov 17 19:36:52 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 25
CPU 0 THERMAL EVENT TSC 143eae423bdb4
TIME 1384713412 Sun Nov 17 19:36:52 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 26
CPU 0 THERMAL EVENT TSC 14df955916d48
TIME 1384717018 Sun Nov 17 20:36:58 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 27
CPU 0 THERMAL EVENT TSC 14df955dcc8aa
TIME 1384717018 Sun Nov 17 20:36:58 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 28
CPU 0 THERMAL EVENT TSC 169779d5f36e2
TIME 1384726875 Sun Nov 17 23:21:15 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 29
CPU 0 THERMAL EVENT TSC 169779e020424
TIME 1384726875 Sun Nov 17 23:21:15 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 30
CPU 0 THERMAL EVENT TSC 16a4f52f1f68a
TIME 1384727177 Sun Nov 17 23:26:17 2013
Processor 0 heated above trip temperature. Throttling enabled.
Please check your system cooling. Performance will be impacted
STATUS 3 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
Hardware event. This is not a software error.
MCE 31
CPU 0 THERMAL EVENT TSC 16a4f5391f734
TIME 1384727177 Sun Nov 17 23:26:17 2013
Processor 0 below trip temperature. Throttling disabled
STATUS 2 MCGSTATUS 0
MCGCAP 180204 APICID 0 SOCKETID 0
CPUID Vendor Intel Family 15 Model 4
TV card is PCI
Code:
modprobe -fr tda1004x
FATAL: Module tda1004x is in use.
|
|
|
| |
|
|
|
|
|
pupiddo
|
|
|
Post subject: RE: Re: RE: Too lag from last 2 nouveau upgrade
Posted: 17.11.2013, 23:56
|
|
Joined: 2012-03-21
Posts: 10
Status: Offline
|
|
| I think I have to check my cpu.... |
|
|
| |
|
|
|
|
|
|
|
